A comprehensive, cross-platform path manipulation library for Dart.

The pathos library provides common operations for manipulating file paths: joining, splitting, normalizing, etc.

We've tried very hard to make this library do the "right" thing on whatever platform you run it on. When you use the top-level functions, it will assume the host OS's path style and work with that. If you want to specifically work with paths of a specific style, you can construct a path.Builder for that style.

## Using

The path library was designed to be imported with a prefix, though you don't have to if you don't want to:

import 'package:pathos/path.dart' as path;


## Top-level functions

The most common way to use the library is through the top-level functions. These manipulate path strings based on your current working directory and the path style (POSIX or Windows) of the host operating system.

### String get current

Gets the path to the current working directory.

### String get separator

Gets the path separator for the current platform. On Mac and Linux, this is /. On Windows, it's \.

### String absolute(String path)

Converts path to an absolute path by resolving it relative to the current working directory. If path is already an absolute path, just returns it.

path.absolute('foo/bar.txt'); // -> /your/current/dir/foo/bar.txt


### String basename(String path)

Gets the part of path after the last separator.

path.basename('path/to/foo.dart'); // -> 'foo.dart'
path.basename('path/to');          // -> 'to'


Trailing separators are ignored.

builder.basename('path/to/'); // -> 'to'


### String basenameWithoutExtension(String path)

Gets the part of path after the last separator, and without any trailing file extension.

path.basenameWithoutExtension('path/to/foo.dart'); // -> 'foo'


Trailing separators are ignored.

builder.basenameWithoutExtension('path/to/foo.dart/'); // -> 'foo'


### String dirname(String path)

Gets the part of path before the last separator.

path.dirname('path/to/foo.dart'); // -> 'path/to'
path.dirname('path/to');          // -> 'to'


Trailing separators are ignored.

builder.dirname('path/to/'); // -> 'path'


### String extension(String path)

Gets the file extension of path: the portion of basename from the last . to the end (including the . itself).

path.extension('path/to/foo.dart');    // -> '.dart'
path.extension('path/to/foo');         // -> ''
path.extension('path.to/foo');         // -> ''
path.extension('path/to/foo.dart.js'); // -> '.js'


If the file name starts with a ., then that is not considered the extension:

path.extension('~/.bashrc');    // -> ''
path.extension('~/.notes.txt'); // -> '.txt'


### String rootPrefix(String path)

Returns the root of path, if it's absolute, or the empty string if it's relative.

// Unix
path.rootPrefix('path/to/foo'); // -> ''
path.rootPrefix('/path/to/foo'); // -> '/'

// Windows
path.rootPrefix(r'path\to\foo'); // -> ''
path.rootPrefix(r'C:\path\to\foo'); // -> r'C:\'


### bool isAbsolute(String path)

Returns true if path is an absolute path and false if it is a relative path. On POSIX systems, absolute paths start with a / (forward slash). On Windows, an absolute path starts with \\, or a drive letter followed by :/ or :\.

### bool isRelative(String path)

Returns true if path is a relative path and false if it is absolute. On POSIX systems, absolute paths start with a / (forward slash). On Windows, an absolute path starts with \\, or a drive letter followed by :/ or :\.

### String join(String part1, String part2, String part3, ...)

Joins the given path parts into a single path using the current platform's separator. Example:

path.join('path', 'to', 'foo'); // -> 'path/to/foo'


If any part ends in a path separator, then a redundant separator will not be added:

path.join('path/', 'to', 'foo'); // -> 'path/to/foo


If a part is an absolute path, then anything before that will be ignored:

path.join('path', '/to', 'foo'); // -> '/to/foo'


### List<String> split(String path)

Splits path into its components using the current platform's separator.

path.split('path/to/foo'); // -> ['path', 'to', 'foo']


The path will not be normalized before splitting.

path.split('path/../foo'); // -> ['path', '..', 'foo']


If path is absolute, the root directory will be the first element in the array. Example:

// Unix
path.split('/path/to/foo'); // -> ['/', 'path', 'to', 'foo']

// Windows
path.split(r'C:\path\to\foo'); // -> [r'C:\', 'path', 'to', 'foo']


### String normalize(String path)

Normalizes path, simplifying it by handling .., and ., and removing redundant path separators whenever possible.

path.normalize('path/./to/..//file.text'); // -> 'path/file.txt'


String normalize(String path) => _builder.normalize(path);

### String relative(String path, {String from})

Attempts to convert path to an equivalent relative path from the current directory.

// Given current directory is /root/path:
path.relative('/root/path/a/b.dart'); // -> 'a/b.dart'
path.relative('/root/other.dart'); // -> '../other.dart'


If the from argument is passed, path is made relative to that instead.

path.relative('/root/path/a/b.dart',
from: '/root/path'); // -> 'a/b.dart'
path.relative('/root/other.dart',
from: '/root/path'); // -> '../other.dart'


Since there is no relative path from one drive letter to another on Windows, this will return an absolute path in that case.

path.relative(r'D:\other', from: r'C:\home'); // -> 'D:\other'


### String withoutExtension(String path)

Removes a trailing extension from the last part of path.

withoutExtension('path/to/foo.dart'); // -> 'path/to/foo'


## The path.Builder class

In addition to the functions, path exposes a path.Builder class. This lets you configure the root directory and path style that paths are built using explicitly instead of assuming the current working directory and host OS's path style.

You won't often use this, but it can be useful if you do a lot of path manipulation relative to some root directory.

var builder = new path.Builder(root: '/other/root');
builder.relative('/other/root/foo.txt'); // -> 'foo.txt'


It exposes the same methods and getters as the top-level functions, with the addition of:

### new Builder({Style style, String root})

Creates a new path builder for the given style and root directory.

If style is omitted, it uses the host operating system's path style. If root is omitted, it defaults to the current working directory. If root is relative, it is considered relative to the current working directory.

### Style style

The style of path that this builder works with.

### String root

The root directory that relative paths will be relative to.

### String get separator

Gets the path separator for the builder's style. On Mac and Linux, this is /. On Windows, it's \.

### String rootPrefix(String path)

Returns the root of path, if it's absolute, or an empty string if it's relative.

// Unix
builder.rootPrefix('path/to/foo'); // -> ''
builder.rootPrefix('/path/to/foo'); // -> '/'

// Windows
builder.rootPrefix(r'path\to\foo'); // -> ''
builder.rootPrefix(r'C:\path\to\foo'); // -> r'C:\'


### String resolve(String part1, String part2, String part3, ...)

Creates a new path by appending the given path parts to the root. Equivalent to join() with root as the first argument. Example:

var builder = new Builder(root: 'root');
builder.resolve('path', 'to', 'foo'); // -> 'root/path/to/foo'


## The path.Style class

The path library can work with two different "flavors" of path: POSIX and Windows. The differences between these are encapsulated by the path.Style enum class. There are two instances of it:

### path.Style.posix

POSIX-style paths use "/" (forward slash) as separators. Absolute paths start with "/". Used by UNIX, Linux, Mac OS X, and others.

### path.Style.windows

Windows paths use "\" (backslash) as separators. Absolute paths start with a drive letter followed by a colon (example, "C:") or two backslashes ("\\") for UNC paths.

## FAQ

### Where can I use this?

Currently, Dart has no way of encapsulating configuration-specific code. Ideally, this library would be able to import dart:io when that's available or dart:html when that is. That would let it seamlessly work on both.

Until then, this only works on the standalone VM. It's API is not coupled to dart:io, but it uses it internally to determine the current working directory.

### Why doesn't this make paths first-class objects?

When you have path objects, then every API that takes a path has to decide if it accepts strings, path objects, or both.

• Accepting strings is the most convenient, but then it seems weird to have these path objects that aren't actually accepted by anything that needs a path. Once you've created a path, you have to always call .toString() on it before you can do anything useful with it.

• Requiring objects forces users to wrap path strings in these objects, which is tedious. It also means coupling that API to whatever library defines this path class. If there are multiple "path" libraries that each define their own path types, then any library that works with paths has to pick which one it uses.

• Taking both means you can't type your API. That defeats the purpose of having a path type: why have a type if your APIs can't annotate that they use it?

Given that, we've decided this library should simply treat paths as strings.

### How cross-platform is this?

We believe this library handles most of the corner cases of Windows paths (POSIX paths are generally pretty straightforward):

• It understands that both "/" and "\" are valid path separators, not just "\".

• It can accurately tell if a path is absolute based on drive-letters or UNC prefix.

• It understands that "/foo" is not an absolute path on Windows.

• It knows that "C:\foo\one.txt" and "c:/foo\two.txt" are two files in the same directory.

If you find a problem, surprise or something that's unclear, please don't hesitate to file a bug and let us know.

## Libraries

path

A comprehensive, cross-platform path manipulation library.