Event Commander

Build Status

An EventBus, EventQueue, Command Pattern, and Undo-Redo library for Dart.


Throughout this doc, properties/methods of classes will be listed in the following format:

property_or_method : [modifiers] Type/ReturnType

Event Bus

The EventBus is the backbone for all of the EventQueue/Command/Undo-Redo communications behind the scenes, but may be used on its own to fire and listen to (a.k.a. 'publish/subscribe') Events.

Basic usage

var event_bus = new EventBus();

event_bus.on(MyEventType, (MyEventType event) => doSomething());
event_bus.signal(new MyEventType()); // doSomething() will be called


A function that accepts an Event, and is meant to be called whenever an event of the appropriate type is fired.


  • listens_to : Type - Property that lists what type of Event the listener is listening to.

  • handler : EventHandler - The EventHandler function that is called whenever an event of the type specified by listens_to is signaled.

  • stopListening() : void - Unregisters the listener from its corresponding EventBus, and stops the handler from being called and handling future events.


  • on(Type event_type, void eventHandler(Event event)) : EventListener - Registers a function (EventHandler) to get called whenever an event of event_type is signaled. Returns an EventListener that can be used to stop the registered EventHandler from handling events.

  • signal(Event event) : Future - Fires/propagates the event instance passed to it, and sends it to all the appropriate EventHandlers subscribed/listening to events of that type. Returns a Future in case some computation needs to happen after all the corresponding EventHandlers have been notified of the event.

  • stopListener(EventListener listener) : void - Same as EventListener.stopListening(). Unregisters an EventHandler function (via its corresponding EventListener) from the EventBus. Stops the EventHandler from being called and receiving future events from this EventBus instance.

  • clearAllListeners() : void - Removes all EventListeners/EventHandlers from the EventBus instance.

  • hasListener(EventListener listener) : bool - Checks whether the given listener is registered with the EventBus instance.

Event Queue

EventQueue is a basic Event/Message Queue implementation that populates itself based on Events sent to the EventBus. By default, an EventQueue will listen to all Events, but each instance may be configured to only queue up specific event types upon creation:

var queue = new EventQueue(event_bus, queue_on: MyEvent);

Alternative declaration using generics (yields same result as above):

var queue = new EventQueue<MyEvent>(event_bus);

(Note: Event types specified using generics will override any values passed to the 'queue_on' parameter)

Sample usage

while(true) {
    if (event_queue.hasNext) {
       Event event = event_queue.popNext();
       // Alternatively, you do not have to remove events
       // from the queue to examine them:
    // break out of the loop under some condition...

if (event_queue.isActive)


Custom Events may be created by sub-classing the Event class, and may contain any assortment of properties and behaviors like you would find in a regular Dart class.

class MyEvent extends Event {
  String description;

Events support a multiple-inheritance scheme whereby listeners for a particular Event Type may also be notified of other Events implementing/extending that Event Type interface. This is accomplished by adding super-class/parent events to a Set<Type> parents property in your Event class.

class MyEvent extends Event {
  String description;

class MyOtherEvent extends Event {
  int number;

// Class must commit to 'implement' MyElement and MyOtherElement to ensure that
// listeners of those events can make use of this event
class MultiEvent extends Event implements MyEvent, MyOtherElement {
  int number;
  String description;

  MyChildEvent(this.number, this.description) {
    this.parents.addAll([MyEvent, MyOtherEvent]);
event_bus.on(MyEvent, (MyEvent e) => doA(e.description));
event_bus.on(MyOtherEvent, (MyOtherEvent e) => doB(e.number));
event_bus.signal(new MultiEvent(1, 'event')); // triggers both doA() and doB()


A Command is just a function that executes a task, and returns a CommandResult.

Sample Usage

basicCommand() {
    return new CommandResult(events: [new DidSomethingEvent()]);
Commander commander = new Commander(event_bus);
// This will call doSomething(), and fire a DidSomethingEvent
// Notice how 'basicCommand' is called before passing it to execute()


All the following properties of a CommandResult may be set in the constructor as named parameters (as shown above):

  • return_value : dynamic - The return value of a command. What will be returned in a Future when Commander.execute() is called. Will return null by default.

  • events : List<Event> - A list of events the command should signal. EventListeners registered to the Commander's event_bus will be notified when the command is executed.

  • undoable : bool - Whether the command can be undone. If true, it must also assign an EntityState to the state parameter.

  • state : EntityState - A snapshot of the changes made by the command on some entity/object (described further below). Only used when undoable is true.

  • execute_first : List<CommandResult> - A sequence of CommandResults that should be processed before the current command. Equivalent to calling commander.executeSequence(execute_first).


The object in charge of notifying the EventBus and Undo Stack of actions performed by Commands. Each Commander instance must be instantiated with the EventBus it will send Events to.

  • execute(CommandResult result) : Future<dynamic> - Despite it's name, this does not actually call your Command function (you must call it yourself, as demonstrated in the example above), it only propagates the result to the associated EventBus and logs any state changes to the UndoRedoService. It will return whatever your Command listed as its return_value, wrapped in a Future.

Example: commander.execute(squareCommand(2)).then((result) => result == 4) will be true

  • executeSequence(List<CommandResult> results) : Future< List<dynamic> > - Executes a sequence of Commands in the order given. Returns a Future with a list of each command's return_value in the order executed.

Example: commander.executeSequence([squareCommand(2), squareCommand(3)]) will return [4, 9] inside a Future

  • event_bus : final EventBus - The EventBus all the command events will be sent to. Will have been defined in the constructor.

  • undo_service : UndoRedoService - The object in charge of managing state. A new UndoRedoService instance is created for each Commander.


Undo functionality can be implemented easily once state management behaviors are encapsulated as Command functions. The undo service provided is a standard linear, stack-like implementation using the Memento Pattern. Modifications made after an undo() call will overwrite any possible redo() states.


Objects must implement the Undoable interface to work with the UndoRedoService. It only requires one method to be implemented:

restoreTo(EntityState state) : void

This ensures that the object can understand and update itself from EntityStates when when requested to do so.

Sample Usage
class MyEntity implements Undoable {
    int id;
    String description;
    restoreTo(EntityState state) {
        id = state.getOrDefaultTo('id', id);
        description = state.getOrDefaultTo('description', description);


The 'memento' object used to store states on the Undo Stack.

  • EntityState<EntityType>({Undoable entity, Map<String, dynamic> state}) - Default constructor, stores the original entity object alongside a Map of its properties.

  • EntityState.change(Undoable entity_object, Map<String, dynamic> state) - Identical to default constructor, used to explicitly denote state changes of an entity (i.e. only properties that have been changed should be included in the state map).

  • diff(EntityState other) : EntityState - Returns an EntityState with the values in other that are different from the current instance.


var stateA = new EntityState(entity: my_entity, state: {'name': 'hello', 'id': 1});
var stateB = new EntityState(entity: my_entity, state: {'name': 'world', 'id': 1});

stateA.diff(stateB); // returns EntityState({'name': 'world'})
stateB.diff(stateA); // returns EntityState({'name': 'hello'})
  • getOrDefaultTo(String property, dynamic default_value) : dynamic - Checks whether the EntityState contains the property specified, otherwise returns the given default_value.

  • contains(String property) : bool - Checks whether the EntityState contains the property specified.

  • forEach(void f(property, value)) - Iterates over each property-value pair in the EntityState

  • properties : Set<String> - The set of of the properties in the state

  • entity : Undoable - The object the EntityState represents.


Each Commander instance manages an UndoRedoService. If you want to be able to undo states for certain components separately, you should create a new Commander for each of the components whose state you wish to track.

  • stack_size : int - How many states are currently saved on the stack

  • canUndo : bool - Whether calling undo() would be a valid operation in the current state

  • canRedo : bool - Whether calling redo() would be a valid operation in the current state

  • recordState(EntityState state) : void - Saves an EntityState onto the stack. Does not need to be called directly when using a Commander

  • clear() : void - Removes all the states currently stored on the stack

  • undo() : void

  • redo() : void


Add event_commander to your pubspec.yaml file to install it from pub:

  event_commander: any

or keep up with the latest developments on this git repo:

    git: https://github.com/oblique63/EventCommander.git

then just run $ pub get and you'll be all set to go.

EventCommander has no additional/external dependencies, and is compatible with both client-side and server-side code.


For Event Bus and Event Queue features only:

import 'package:event_commander/event_bus.dart';

For Event Bus, Event Queue, and Command/Undo features:

import 'package:event_commander/event_commander.dart';